10 Workplace Risks Managers

Managers have a direct influence on how health and safety procedures are applied during everyday work. They may help identify hazards, assess risks, communicate procedures, monitor working practices, and make sure corrective actions are followed. Training can give managers a clearer understanding of these responsibilities and the principles behind effective risk control. IOSH Managing Safely eLearning can help managers build practical knowledge that can be applied to common workplace safety situations. The following ten risks show where that knowledge can support better decisions and stronger safety practices.

How IOSH Managing Safely Supports Better Risk Management

IOSH Managing Safely introduces managers and supervisors to fundamental workplace health and safety principles. The training covers areas such as risk assessment, hazard identification, incident investigation, and understanding safety responsibilities. Managers can use this knowledge when reviewing workplace activities and deciding whether existing controls are suitable. Training alone does not remove workplace hazards, but it can help managers recognise issues that require attention. Effective safety management still depends on suitable procedures, competent advice, employee involvement, supervision, and regular review.

Understanding the Manager’s Role in Workplace Safety

Managers do not necessarily need to become technical safety specialists, but they should understand their responsibilities within the workplace safety system. They may be responsible for ensuring procedures are followed, reporting concerns, allocating resources, and responding to identified risks. They also have an opportunity to identify unsafe conditions during normal workplace activities. Regular communication with employees can reveal hazards that may not be obvious during a formal inspection. This makes safety leadership part of normal management rather than a separate activity.

From Hazard Identification to Risk Control

A hazard is something with the potential to cause harm, while risk considers the likelihood and potential consequences of that harm occurring. Managers need to distinguish between the two before deciding how a risk should be controlled. Risk assessment provides a structured way to consider who could be affected, how harm could occur, and what controls are already in place. The assessment should then inform practical actions rather than becoming a document that is rarely reviewed. Controls should also be checked when workplace conditions, equipment, tasks, or processes change.

1. Slips, Trips and Falls

Slips, trips, and falls can result from conditions that develop during routine workplace activities. Spilled liquids, uneven surfaces, obstructed walkways, trailing cables, poor lighting, and unsuitable floor conditions can all create hazards. Managers can reduce these risks by making workplace inspections part of normal operations rather than waiting for an incident to occur. Employees should have a clear method for reporting hazards so that problems can be addressed promptly. Good housekeeping, suitable maintenance, clear access routes, and appropriate procedures can all contribute to better control.

Managers should also consider why a recurring hazard is appearing instead of repeatedly correcting the same problem. A blocked walkway may indicate inadequate storage arrangements, while repeated spills may indicate a problem with a process or piece of equipment. Addressing the underlying cause can provide a stronger control than relying on employees to remain alert. Inspection findings should be recorded where appropriate and corrective actions followed through. This creates a more consistent approach to preventing avoidable workplace incidents.

2. Manual Handling Injuries

Manual handling includes activities such as lifting, carrying, pushing, pulling, and moving loads. Risk can increase when loads are heavy, awkward, unstable, difficult to grip, or moved over unsuitable distances. Repetitive handling and poor working postures can also increase the physical demands of a task. Managers should review how tasks are performed rather than assuming that workers can simply use better lifting techniques. The first question should be whether the manual handling task can be avoided, reduced, or assisted through suitable equipment or changes to the work process.

Where manual handling remains necessary, managers should consider the load, task, working environment, and individual circumstances. Suitable equipment, training, supervision, and work arrangements can help reduce exposure to unnecessary risk. Employees should also have a clear process for reporting difficulties with handling tasks. Risk assessments should be reviewed when the nature of the task changes or when incidents and concerns indicate that existing controls may not be sufficient.

3. Workplace Fire Risks

Fire safety requires managers to consider how fires could start, who could be affected, and how people would respond during an emergency. Potential ignition sources, combustible materials, electrical equipment, and unsuitable storage arrangements may all require attention. Managers should also ensure that emergency routes and exits remain accessible. Employees need to understand relevant procedures, including how to raise an alarm and respond to an evacuation. Fire safety arrangements should be reviewed regularly and maintained according to applicable requirements.

Managers can support fire prevention by making safety checks part of routine workplace management. Defective equipment, blocked exits, damaged fire safety equipment, or changes to the workplace should not be ignored. Responsibilities should be clearly allocated so that identified issues are acted upon. Emergency arrangements also need to reflect the actual workplace rather than relying solely on generic instructions. Appropriate competent advice should be obtained where specialist fire safety knowledge is required.

4. Unsafe Use of Workplace Equipment

Machinery, tools, vehicles, and other workplace equipment can create serious risks if they are unsuitable, poorly maintained, incorrectly used, or operated without appropriate safeguards. Managers can reduce these risks by checking whether equipment is appropriate for the task and whether employees have received relevant instruction. Maintenance and inspection requirements should also be understood and followed. Guards and other protective measures should not be removed or bypassed without proper control. Unsafe equipment should be reported and addressed rather than relying on employees to work around the problem.

Supervision is particularly relevant where equipment is used frequently or where incorrect use could result in harm. Managers should pay attention to recurring unsafe practices and investigate why they occur. The issue may involve inadequate training, unclear procedures, unsuitable equipment, or production pressures. Addressing those underlying factors can produce stronger controls than simply reminding employees to be careful.

5. Hazardous Substances and Chemical Exposure

Workplaces can contain hazardous substances in many forms, including chemicals, dust, fumes, vapours, and certain cleaning products. Exposure can occur through breathing, skin contact, ingestion, or other routes depending on the substance and work activity. Managers should know which substances are present and understand the relevant control measures. Storage, handling, labelling, ventilation, and access to safety information all need appropriate attention. Employees should also know how to work safely with substances relevant to their duties.

Risk assessments should consider the substance, exposure route, frequency of exposure, quantity used, and existing controls. Where possible, exposure should be prevented or reduced through appropriate control measures rather than relying only on personal protective equipment. Managers should also respond to reports of leaks, unusual fumes, damaged containers, or other concerns promptly. Procedures should be reviewed when substances or work processes change.

6. Working at Height

Working at height presents a fall risk whenever a person could fall far enough to suffer injury. Activities involving ladders, platforms, scaffolds, roofs, or elevated work areas may require specific controls. Managers should first consider whether work at height can be avoided. If it cannot, the work should be properly planned and suitable equipment and control measures selected. Equipment should be appropriate for the task and maintained in suitable condition.

Training and supervision are also important parts of managing work at height. Employees need to understand the correct use of equipment and the restrictions associated with particular methods of access. Managers should not treat a ladder or other access equipment as automatically suitable simply because it is available. The task, duration, environment, and potential consequences of a fall should all be considered during planning.

7. Electrical Safety Hazards

Electrical risks can arise from damaged cables, defective plugs, unsuitable equipment, poor maintenance, overloading, or unauthorised modifications. Managers can help control these hazards by ensuring that equipment is maintained and that defects are reported through an established process. Employees should understand that damaged electrical equipment should not simply be used until it fails completely. Appropriate inspection and maintenance arrangements should be followed according to the type of equipment and workplace requirements.

Managers should also pay attention to temporary electrical arrangements and changes to work areas. Cables placed across walkways may create both electrical and trip hazards. Equipment that becomes damaged during normal use should be removed from service when appropriate and assessed by a competent person. Electrical repairs should not be carried out by people who lack the required competence.

8. Poor Workplace Housekeeping

Poor housekeeping can contribute to several different hazards at the same time. Cluttered work areas can restrict movement, obstruct emergency routes, increase trip risks, and make it harder to access equipment safely. Materials stored incorrectly can also fall, spill, or interfere with normal work activities. Managers should establish clear expectations about storage, waste removal, access routes, and work area maintenance. Employees should know who is responsible for dealing with particular housekeeping issues.

Good housekeeping should be treated as part of routine workplace management rather than an occasional cleaning exercise. Managers can include housekeeping in regular inspections and follow up when standards decline. Recurring problems may indicate insufficient storage space, unclear responsibilities, poor work planning, or unsuitable processes. Identifying these causes can make corrective action more effective.

9. Workplace Stress and Wellbeing Risks

Work-related stress can be influenced by factors such as excessive demands, poor communication, lack of control, unclear responsibilities, and insufficient support. Managers should recognise that workplace stress is not simply an individual issue. The way work is organised can affect employee wellbeing and may require management attention. Regular communication can help identify concerns about workload, working arrangements, or organisational pressures. Managers should respond appropriately and follow relevant workplace procedures for support and escalation.

Managers are not expected to diagnose medical conditions. Their role is to recognise workplace factors that may contribute to stress and take reasonable steps within their responsibilities. Reviewing workloads, clarifying expectations, improving communication, and addressing organisational problems can form part of a wider approach. Where specialist support is required, managers should follow the organisation’s established procedures.

10. Poor Incident Reporting and Near-Miss Management

An incident report can provide information about weaknesses in existing safety controls. Near misses can also reveal hazards before someone is injured, making reporting an important part of prevention. Managers should make sure employees understand how to report incidents and near misses and know that concerns should be taken seriously. Reports should be reviewed to determine what happened and whether existing controls remain suitable. The objective should be learning and corrective action rather than simply completing paperwork.

An effective incident management process can include:

1) Recording relevant incident and near-miss information.

    1.  

2) Identifying immediate and underlying causes.

3) Reviewing existing risk controls.

4) Assigning corrective actions to appropriate people.

5) Monitoring whether corrective actions have been completed.

6) Reviewing procedures where lessons indicate a need for change.

Managers should look for patterns rather than treating every incident as an isolated event. Repeated reports involving similar hazards may indicate that an existing control is ineffective or inconsistently applied. Reviewing trends can help managers decide where additional attention or resources are needed.

A Practical Risk Management Routine for Managers

Managers can apply a simple cycle to everyday safety management: identify hazards, assess risks, introduce suitable controls, and review the results. This process should be connected to normal workplace activities rather than performed only for formal compliance exercises. Employee feedback, inspections, incident reports, maintenance records, and changes to work processes can all provide useful information. The level of attention should reflect the nature and seriousness of the risk.

Identify

Look for hazards during workplace inspections, task observations, employee discussions, and incident reviews. Pay attention to changes in equipment, processes, staffing, materials, and working conditions. A hazard that was previously controlled may require reassessment after a change.

Assess

Consider who could be harmed, how harm could occur, and what controls are already in place. The assessment should be proportionate to the level of risk and based on the actual work being performed.

Control

Select measures that reduce the risk effectively. Depending on the situation, this may involve changing a process, improving equipment, introducing physical safeguards, providing information and training, or using suitable personal protective equipment.

Review

Controls should not be considered permanent simply because they were suitable when introduced. Review them after incidents, near misses, significant workplace changes, or evidence that the control is not working as intended.

For managers who want to develop their workplace safety knowledge further, the IOSH Working Safely training course provides another training option focused on basic workplace safety awareness.

How IOSH Managing Safely Can Support Safety Leadership

Training can give managers a stronger foundation for understanding workplace hazards, risk assessment, incident prevention, and their responsibilities. The value comes from applying that knowledge consistently during everyday management activities. Managers can use risk assessment principles when reviewing tasks, question whether controls remain suitable, and encourage employees to report hazards. They can also help create clearer communication between workers and those responsible for health and safety.

The course should not be viewed as a substitute for specialist advice, workplace procedures, or competent risk assessment where these are required. Effective safety management involves several parts working together, including suitable controls, employee involvement, supervision, maintenance, training, and review. Managers who understand these principles are better placed to recognise when an issue needs additional attention.

Managing Safely training can be considered by managers and supervisors who need structured training in workplace health and safety responsibilities.

Conclusion

Workplace risk management is an ongoing management responsibility. Managers can make a practical contribution by identifying hazards early, assessing risks carefully, maintaining suitable controls, and responding to employee concerns and incident information. IOSH Managing Safely training can provide useful knowledge for these activities, but effective safety performance also depends on how that knowledge is applied within the workplace. Regular monitoring and review help ensure that safety controls remain appropriate as work conditions change. Managers who take a consistent approach can help create safer working practices while supporting the wider health and safety arrangements of their organisation. For information about available training options, you can contact us.

Frequently Asked Questions

What is IOSH Managing Safely designed to teach managers?

IOSH Managing Safely is designed to give managers and supervisors an understanding of workplace health and safety responsibilities. It covers topics such as hazard identification, risk assessment, controls, and incident-related safety principles.

Can IOSH Managing Safely help managers with risk assessments?

The training can help managers understand fundamental risk assessment principles and how hazards and controls should be considered. Specific workplace assessments may still require appropriate competence or specialist support depending on the nature of the risk.

What workplace hazards should managers monitor regularly?

Managers should monitor hazards relevant to their workplace, which may include slips and trips, manual handling, fire, equipment, hazardous substances, electrical risks, work at height, housekeeping, stress-related factors, and incident reporting.

Is IOSH Managing Safely suitable for supervisors?

Yes. The training can be relevant to supervisors and managers who have responsibility for workplace activities and need a better understanding of health and safety management.

How can managers apply IOSH Managing Safely knowledge at work?

Managers can apply the principles by identifying hazards, assessing risks, checking existing controls, communicating safety requirements, responding to incidents, and reviewing whether controls remain effective.



Contact Us - Blog Post

  • This field is for validation purposes and should be left unchanged.
    By clicking Send, you agree to our terms and conditions applicable to our service and acknowledge that your personal data will be used in accordance with our privacy policy and you will receive emails and communications about course-related news.

Which course is best for me?


Ask us here

Claim your course brochure

Request your copy of Wise Global Training’s eLearning Course guide — who we are and how we can help you reach your goals.

Claim your course brochure